Density Report

The purpose of the lab has 2 principles; they are the following: element A: To confirm the identity of 3 regular solids establish on their densities.

break down B: To confirm that dumbness is an intensifier property.

Part A: In order to verify the densities of the trine solids, which were the subjects of our experiments, you need to find the mass and the volume of the solids then destine mass by volume (m/v.) After doing so you will get the compactness of a single solid. After accomplishing this you mustiness proceed by finding your percentage error. The actual meanness of Aluminum (Al) is 2.70g/cm the core I got for density was 2.91 which is indoors the 10% acceptable range therefore, verifying that my solid was aluminum. I use this procedure on Brass and Iron (Fe) as well. For Brass the actual density was 8.7 g/cm . My result was 9.09, still within the 10% acceptance range. Lastly, the actual density of iron is 7.87 g/ cm my calculated density was 8.41 g/cm . Which is also within the 10% range. This is the technique used to identity 3 regular solids based on their densities.

Part B: dumbness is an intensive property because it doesnt matter on the size of the sample it depends on what the sample is made up of.



For example weight wouldnt be an intensive property, but or else an extensive one, because it depends on the quantity of the substance on hand. parsimoniousness is rather the opposite. Depending on what the substance is made up of (m/v) the density differs. Based on my graph (mass vs. volume), a straight canal is formed, proves that density remains constant despite variations in volume.

Density is the amount of stuff per unit of volume, (m/v). The measurement of density is obtained by...

If you inadequacy to get a full essay, order it on our website: Ordercustompaper.com



If you want to get a full essay, wisit our page: write my paper